We process just about every material, from aluminum to highly acid-resistant stainless steel, to suit a wide variety of operating conditions. Whether it is screws with a particular surface or sea water-resistant connectors for the offshore sector: we combine technical expertise with cost-effectiveness.
All our raw material sources are subject to strict supplier management and detailed test certificates are available for each of material.
The following materials are generally in stock, with others available on request.
|302 HQ||A2||XM-7||1.4567||Austenitic chromium-nickel steel, highly resistant to corrosion. Due to the additional copper content, it is particularly suitable for cold forming.|
|304||A2||304||1.4301||Austenitic chromium-nickel steel, highly resistant to corrosion.||316||A4||316||1.4401||Particularly corrosion-resistant austenitic chromium-nickel steel with molybdenum content.|
|316 Cu||A4||316 Cu||Similar to 316 with additional copper content to improve cold formability.|
|316 L||A4||316 L||1.4404||Particularly corrosion-resistant austenitic chromium-nickel steel with molybdenum content and with lower carbon content compared to conventional 316.|
|410||C1||410||1.4006||Heat-treatable, martensitic stainless steel. Polished against water and steam resistant.|
|430||F1||430||1.4016||Ferritic chromium-nickel steel, mirror polishing, resistant to water, steam, weak acids.|
|SWRCH6 – SWRCH10||For unhardened screws.|
|SWRCH1018||Case-hardened, mostly for self-tapping screws.|
|SWRCH35K/35ACR||Heat treatable up to strength 8.8.|
|SWRCH40K/40ACR||Heat treatable up to strength 10.9|
|10B21||Heat treatable up to strength 8.8.|
|SCM 435||Heat treatable up to strength 12.9.|
|SCM 440||Heat treatable up to strength 12.9.|
|6061||3.3211||Aluminum for cold forming, up to T6 heat treatable|
|7075||3.4365||Aluminum for cold forming, heat treatable, higher corrosion resistance|